Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Bells/Noise Makers

$13.00
The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters
$46.49
- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting
$24.95
The original model of our mountain bike bell, Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. It includes two separate o-rings to fit all handlebar sizes and is easy to move between bikes. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life. - We've also upgraded the backing pad to a much grippier rubber that prevents the bell from movement while shifting between ring modes. The new pad is much more durable than the old pad and won't wear out.
$24.95
Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.
$12.75
• Adjustable quick-release strap • Ideal for MTB handlebars • Fits 20-32mm handlebars
$13.50
Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$13.00
A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters
$10.00
Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters
$14.99
Let 'em know you're coming with a retro Nutcase bike bell. Thumb lever provides a traditional ringer sound. - Mount Location: Handlebar
$29.99 - $36.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available - Mounts with steel strap and features lever strike operation - Fits bars 22.2mm to 31.8mm - Made in Japan
$16.99 - $21.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Spring-loaded lever arm strike mechanism - Standard domes are 55mm wide and Mini domes are 45mm - Steel band clamps fits bars 22.2 to 26.0mm - Made in Japan
$17.00
Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters
$8.79
Classic Ring Minimalist design and low profile. Features - Classic ring - Low profile with clean minimalist design - Adjustable rotating thumb spring trigger for ambidextrous use - Quick Assembly: Tool-free - ratchet strap mounts to any size bar 19.2 - 31.8 mm - Alloy dome with molded thermoplastic mounting - Weight: 0.05 lb / 20g
$11.90
- Rin rin mini bells produce an extremely clear tone. Available in a wide variety of colors including white - Made in japan
$21.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Spring-loaded lever arm strike mechanism - Standard domes are 55mm wide and Mini domes are 45mm - Steel band clamps fits bars 22.2 to 26.0mm - Made in Japan
$12.50
The Incredibell Clever Lever has a very pleasant double ding sound. The unique lever can be pivoted to any position so it can be easily reached by the thumb or another finger. - Dome Diameter: 38mm (1.5") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters
$19.90
- Designed with road drop bars in mind - Can mount on the brake hood, On cable housing, And on some flat bar levers (Levers need to have flat section less than 9mm deep) - Clamps on with a screw. Simply turn the bell dome to loosen and tighten - Reversible for right and left hand use - Does not use a spring loaded clip - Made in japan
$19.95 - $19.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
$24.99
Classically designed bicycle bell featuring modern materials and a robust machined-aluminum handlebar mount. The bell dome and striker are crafted from high-quality brass with a sturdy stainless steel spring. Its secure base quickly mounts to most modern bicycle handlebars (25.4mm or 22.2mm diameter) with a stainless steel Torx bolt. And its narrow design attaches neatly between other handlebar accessories. It provides a powerful ring that’s excellent for all cyclists and commuters alike. This bell is engineered to be extremely durable with excellent resistance to weather-related wear-and-tear. This lightweight and stylish ringer is the ultimate bicycle bell. - Compact, classic bell-shape construction for a high-quality sound - Bell and striker are made from high-polished brass - CNC-machined aluminum hard handlebar mount, designed for 25.4 - 22.2mm tube - Molded rubber shims add grip and fine tune fitting - Stainless steel hammer - Impressively loud ring - Weight: 34g
$12.00
A steampunk statement for your handlebars. A transparent dome lets colorful gear workings of the insides of the bell be seen. The Gear Bell is even rainproof.
$9.99
Medium sized bells with exciting and classic designs to fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!
$21.90
- Crane bells are some of the finest bells available - Timeless designs with a loud and clear tone - Features the Cat-Eye Flex-Tite bracket, which installs without tools on most areas of the cockpit. - Made in Japan
$21.90
- Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available - Mini brass bell with alloy clamp - Headset spacer version includes a spacer to work with 1" or 1-1/8" steer tubes - Suzu: lever strike - 45mm in diameter
$7.99
Clear and Classic Ring Cut through traffic noise and make yourself known on the road while protecting yourself from the risk of auto and pedestrian accidents. Features - Classic ring - Low profile with clean minimalist design - Thumb spring trigger - Quick Assembly: Easy screwdriver assembly installation on 22.2 mm bar - Alloy dome with molded thermoplastic mounting - Weight: 0.04 lb / 18g
$26.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Features a unique Crane insignia on top of the bell - Mounts with steel band and features lever strike operation - 57mm dome and fits bars 22.2mm to 31.8mm - Made in Japan
$29.99 - $34.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Mounts with steel strap and features lever strike operation - Fits bars 22.2mm to 31.8mm - Made in Japan
$14.99
Mounts to the handlebar for easy access.
$29.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Mounts with steel strap and features lever strike operation - CD3171 and 3172 have matching domes and strikers - Fits bars 22.2mm to 31.8mm - Made in Japan
$7.99
Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!
$7.99
Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!
Page 1 of 2 Next page