Tools

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

Park Tool's 750.2 Centering Cone Adaptor increases the size of the centering cone of the HTR-1 and HTR-1B Headtube Reaming and Facing Sets. The 750.2 will allow you to use the HTR-1(B) to ream and face head tubes designed to accept IS, ZS, and 1.5-inch EC headset standards. Before reaming or facing, make sure you have the correct cutting tool and pilot for the headset standard(s) you are using. Please refer to our product pages for cutters and pilots for this detailed compatibility information.

To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

Disc brake rotors should be regularly checked for wear to ensure safety and performance. The DCA-1 installs onto most digital, dial, or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the center of the braking surface, bypassing the unworn edge to ensure an accurate measurement. The conical end points of the DCA-1 can be used to measure center-to-center distances of bolt holes for calculating bolt circle diameter (BCD) of chainrings and cranks. - Compatible with most standard vernier, dial, and digital caliper designs

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)

The Park FR-7 Freewheel Remover fits Falcon freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

Park's Folding Chain Tool is a heavy-duty tool-steel shop-quality chain tool that also folds for carrying in your pack or pocket for use on the road and trail. It's compatible with 9-, 10- and 11-speed chains. It also includes a folding peening anvil for Campagnolo 11-speed chains.

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

Park's Four-Sided Spoke Wrenches grip 4 sides of the spoke nipple so they offer an excellent grip and won't slip or round nipples when turning even the tightest spokes and/or aluminum nipples. These popular wrenches also have easy-to-hold vinyl-coated loop handles that are color-coded according to spoke size for easy identification. The loop handle makes them easy to hang on your tool board too.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

This dual-sided brush is specifically designed for cleaning hard-to-reach areas of the bicycle drivetrain. The long, stiff bristles of the GSC-3 are narrow enough to reach between the gears of tightly-spaced modern cassettes, while the slim contoured end is capable of picking grit and grime out of tight spaces such as derailleur pulley wheels.

A sturdy bicycle cleaning brush with a unique angled and contoured shape – perfect for cleaning cassettes and freewheels as well as tires. With a strong ergonomic handle and stiff nylon bristles, the GSC-4 scrubs away the toughest muck and mess.

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

Park's Hydraulic Brake Piston Press is used to set or reset the piston(s) inside hydraulic disc brake calipers during installation, maintenance and repair. Just push it into the caliper to wedge the piston into place. It's made of tough tool steel with a comfortable and oversize rubber handle for a great grip.

Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

The strong, lightweight IB-2 features ten essential tools in the compact form factor of our unique I-Beam handle. Perfect for on-the-ride adjustment of brakes, handlebars, saddles, or derailleurs. With its compact size, the IB-2 is a perfect tool for the saddlebag, jersey pocket, or toolbox.

Designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900, and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminum for a perfect fit and to prevent marring expensive parts. - Machined flat face for optimal lockring engagement - For lockrings with 41mm outside diameter and 16 notches - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - 6061 aluminum construction

The MTC-40 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible driver - Combo cross/straight tip screwdriver - 5- to 12-speed compatible chain tool* - Rotor straightener - CO2 cartridge inflator adaptor - Bottle opener - Key ring holder - Weight: 217g (7.65 ounces) *The MTC-40 chain tool will not peen Campagnolo 11-speed chain rivets (see CT-4.3 or CT-6.3)

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool blue vinyl for outstanding comfort and ease of use.

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

The MT-10, 20, 30 and 40 are high quality folding take-along tools that feature forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.

Made from tough steel and reinforced with extra material at the highly stressed wrench openings, Park’s shop-quality Pedal Wrench is built to easily install and remove pedals, and to last and last. It has 15mm and 9/16-inch precision openings to fit all pedals. And it boasts a long, round, vinyl-coated handle that won’t dig into your hand and provides optimum leverage. There's even a hole in the end of the wrench for hanging it on your toolboard.

Shop quality preset torque driver that limit torque applied to fasteners, preventing over tightening and damage to lightweight components. The PTD-4/PTD-5/PTD-6 feature all metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at our factory in Minnesota. - ¼ inch hex drive - Includes 3, 4, 5mm and T25 bits stored in the handle - Limits torque applied to fasteners while rotating clockwise - All metal internal construction for long life

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

These shop-quality L-shaped hex wrenches have a genuine Bondhus balldriver tip on the long arm (excluding the 10mm) for hard-to-reach bolt heads and a straight tip on the short arm for high-torque applications. The HXS-1.2 includes a handy portable tool organizer/holder and it's hinged for easy access. • Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes • Wrench tips are precision chamfered for a clean, tight fit • Made from industrial-quality Bondhus Protanium high torque steel

Park's Professional Pedal Wrench features an angled, oversize head for maximum leverage. It has two 15mm wrenches at different angles, so you can maximize your leverage, and a long, round, vinyl-coated handle that won’t dig into your hand the way flat wrenches do. There's even a hole in the end for hanging the wrench on your toolboard.

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.

This combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending and flexing, with a molded handle for comfort. - 1/8-inch model works on 1/8-inch chains and sprockets - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel/Cassette Lockring Tools - Features hardened pins to keep the chain in place

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

The Park Tool SBS-1.2 is a shop-quality set of sockets, hex bits, and Torx style bits, selected specifically for common bike repair needs. Ideal for use with Park Tool torque wrenches, the SBS-1.2 3/8" drive bits and sockets are made from tough, chrome vanadium steel for lasting durability.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

This handy shop aid is ideal for sizing spokes, ball bearings, and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits. • Has both metric and fractional spoke length markings • Anodized aluminum with embossed markings to allow easy reading and long life

Three of the most common Torx compatible wrench sizes in our classic 3-way design. The TWS-3 is useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10). TWS-3 FEATURES - T10, T25 and T30 Torx compatible set - Wrenches made from industrial tool steel, through hardened and tempered for long life

• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.

• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers

Park's Torx Wrench Set is just what you need to make repairs on many of your bike parts that use Torx (star-shaped) fittings, such as disc brakes, pedals, chainring bolts, and others. It offers the common bicycle wrench sizes (T7, T9, T10, T15, T20, T25, T27, T30 and T40) in a convenient fold-up set. Its composite handle is super strong, comfortable to use and slip resistant.

• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

- Featuring all five Muc-Off brushes in a handy storage bag - Claw brush ideal for chain, cassette and sprocket - Detailing brush ideal for tight areas such as suspension mounts or fork crowns - Soft washing brush ideal for your bike frame and wheels - Wheel and component brush ideal to clean rim and spokes with ease - Two-prong brush ideal to reach hard-to-shift dirt on your components

- For cleaning, drying, and polishing - Split-fiber technology increases surface area for better absorbency - Machine washable - Reduces chance of surface damage - Luxury deep pile

- Designed to clean your bike frame and components while caring for delicate finishes - Tough impact resistant dual density handle that won’t slip in extreme conditions - Oversized head for fast cleaning of large areas - Rubberized impact zones for maximum protection

- Heavy-duty device that cleans chain in seconds - The kit includes a 75 ml bottle of Drivetrain Cleaner that can be either sprayed over the drivetrain or poured into the top reservoir - Liquid release button ensures the application of the cleaner is quick and easily controlled. - Abrasive cleaning teeth and rotating brush wheels which have 120 contact points cover every part of each chain link for a deep and thorough clean - Excess dirty fluid drops into a second lower reservoir so it’s kept away from the clean chain

Carry the essential roadside/trailside tools with the MSW Tool Hugger Kit. The Kit includes all the basics for quick repairs: CO2 cartridges, inflator head, tire levers, mini tool, and patch kit. Bring along your own tube and roll them all up in the Tool Hugger Wrap, which attaches to standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Liv Tire Levers

- External bottom bracket tool - For use with our 32mm CNC rod, an adjustable wrench, or 3/8" ratchet - 16 notch, 44mm - Shimano BB80, BB5700, BB70, BB51, Enduro T47, Wheel's MFG T47, FSA, Hope, SRAM, Chris King, Race Face, (most common)

Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, two CO2 cartridges and two Matrix levers. Not available with CO2 cartridges in all countries. Weight: 95g /311g Loaded

Professional-grade, versatile bike chain multi-tool engineered for a variety of road or trailside repairs. The Multi Chain Pliers are constructed from machined aluminum and feature an integrated quick-link tool, chain breaker, valve core tool, bottle opener, rotor aligner, and magnetic holders for up to two spare quick links. Its slim design allows for maximum portability and it's engineered for long-lasting use. It also features an anodized finish and a hardened steel chain breaker pin. Mountain bikers, road cyclists, and gravel grinders will all find its versatility highly useful, whether in the workshop or out on the road or trail. - Weight: 61g - Dimensions: 120 x 38 x 10mm

Durable and compact chrome-plated ratchet tool designed for bicycles. Fine-tooth ratchet with reversing lever and a fixed opening on opposite end. Tool selection optimized for road, gravel and mountain bikes. Super-hard CRV (chrome vanadium) bits. Custom, machined aluminum extension adapter with laser-etched logo. Integrated magnet holds tool bits in place. Ratchet Kit comes in a compact, soft shell carrying case. - Weight: 140g Tool Bits: - Hex 2, 2.5, 3, 4, 5, 6, 8mm - Star Shaped T10, T25, T30 - Flat Head - Phillips-Head

- Lightweight and low profile - Forged center-pivot stainless steel bits - Durable stainless steel fastening hardware - Hex 3/4/5/6mm - Phillips - 53g

- CNC 7075 alloy side plates with link storage - Optimized for mountain bikers and gravel riders - Anti-corrosion forged center-pivot stainless steel bits - Durable stainless steel fastening hardware - Hex 2/2.5/3/4/5/6/8mm - T10/T25/T30 - Phillips - Chain breaker tool (includes hex 8/10mm wrench, 4 spoke wrenches) - Multi-function flat tool (bottle opener, disc brake wedge, rotor truing tool) - 156g

Innovative 2-in-1 cycling CO2 dispenser and tubeless tire repair kit simultaneously inflates and seals tubeless tires. Machined aluminum construction is both lightweight and highly durable. Hardened steel reamer scours hole, inserts plug, and inflates tire for an efficient and rapid repair. CNC-machined twist knob manually controls release of CO2 gas. Aluminum canister holds the five included tire plugs and safely stores the reamer when not in use. High-quality tire plugs aggressively seal holes that are too large to be sealed by sealant alone (hole size varies from tire to tire). Sleek, compact design fits in a pocket or straps to your bike with a simple Velcro strap. Note: Sealing performance may vary based on puncture size, tire size, and tire pressure. - Compact tubeless tire repair kit. - Machined aluminum storage tube doubles as a handle. - Combined tire reamer and insertion tool. - Includes five tire plugs. - CO2 cartridges sold separately.

The V Pro bike multi tool series includes a refined collection of tools developed for today's modern bicycles. Each model is designed and manufactured in-house and engineered to efficiently repair most road or trailside mechanicals. The machined steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance. The machined aluminum side plates are anodized black and deliver a compact, comfortable feel during use. With unmistakable Lezyne styling, the lightweight V Pro tools offer amazing value and functionality for all types of cyclists. - CNC 7075 alloy side plates - Anti-corrosion black chrome vanadium fastening hardware - Enhanced anti-corrosion black chrome vanadium bits - Hex 2/2.5/3/4/5/6/8mm - T10/T25/T30 - Phillips - 96g