Bindings

Skiing’s most popular binding for many years, the Griffon is totally re-designed for 2020/21. Starting up front, the new Triple Pivot Elite 3 toe piece with integrated Anti-Ice Rail gives the binding a new look and a great way to remove snow and ice from your boot soles without damaging the binding housing. The Inter Pivot 3 heel maintains its signature power transmission, while also having been re-designed to make it easier to step in, especially with many of today’s rubber boot soles. Offered in 90, 100, 110, and 120mm brake widths, all ski shapes are covered. With SOLE.ID technology, the Griffon offers 100% compatibility with any boot fitting the ISO 5355 (Alpine) and ISO 9532 (Alpine Touring) norms. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. AFD GLIDING PLATE - MARKER bindings are equipped with a moveable AFD (anti-friction device) supporting a precise release almost entirely unhindered by dirt, snow, and ice! Individual adjustment of the AFD to the area of application enhance optimized functionality - from racing, for children’s bindings, or on ski tours. ANTI-ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. INTER PIVOT 3 FREERIDE HEEL - The third and newest generation completely redone: improved power transmission, energy absorption, and vertical heel elasticity combined with an improved step-in comfort. TRIPLE PIVOT ELITE TOE - The toe construction with DIN/ISO up to Z 18 allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5°, it provides higher energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.

Super-light, ascent-oriented touring pin binding with ISI toe piece and great step-in comfort. Built for high alpine challenges. The ultra-light Alpinist pin binding (270 g not including brake) offers everything experienced touring skiers need. Its construction allows active length compensation without affecting the ski’s flex. A very stiff, ISI front makes the binding easier to step into, as a wide footprint with integrated stop automatically positions and aligns your boot. Kinematically optimized pin levers then allow the pins to snap shut with just a gentle push. The heel features 0°, 5° and 9° climbing aids and can be switched quickly and easily from ascent to descent mode. A 38 mm wide hole pattern transfers power brilliantly to the edges, which means control and great steering.

Super-light, ascent-oriented touring pin binding with ISI toe piece and great step-in comfort. Built for high alpine challenges. The ultra-light Alpinist pin binding (270 g not including brake) offers everything experienced touring skiers need. Its construction allows active length compensation without affecting the ski’s flex. A very stiff, ISI front makes the binding easier to step into, as a wide footprint with integrated stop automatically positions and aligns your boot. Kinematically optimized pin levers then allow the pins to snap shut with just a gentle push. The heel features 0°, 5° and 9° climbing aids and can be switched quickly and easily from ascent to descent mode. A 38 mm wide hole pattern transfers power brilliantly to the edges, which means control and great steering.

Progressive, very light, and sturdy rookie freeride/freestyle binding that is GripWalk-ready and equipped with state-of-the-art components. The completely redesigned Squire 11 has progressive looks and is specially designed for lighter weight but fully motivated freeride and freestyle rookies. An extensively improved, lightweight Triple Pivot Light toe piece features a distinctive Ice Off Rail to keep the sole free of snow and ice. A state-of-the-art Hollow Linkage heel with its wider boot holder reduces the step-in force by approximately 35%, even with GripWalk soles. All in all, the Squire 11 is very compact and, despite its GripWalk compatibility, sits only 24mm high, which allows a very direct feel and ski control. - Category: Freeride - Brake width: 90, 100, 110mm - Din/ISO Range: 3.0 - 11.0 - Boot type:Adult, standard Alpine; GripWalk Adult - Recom. Skier's Weight: 30 - 110kg - Stand height w/o ski: 24mm - Toe System: Triple Pivot Light 2 - Step-in Heel: Hollow Linkage 2 - Heel adjustment range: 20mm - Weight: 820g - AFD Gliding Plate: Stainless Steel

The freeride pivot ski binding sets the standard for control and release for the world's most dedicated skiers. The binding's Full Action toe piece and unique "turntable" heel design offer expert freeskiers a responsive connection between boot and ski for instant power transmission and precise ski control. It features powerful shock absorption and travel with confident retention and release for aggressive skiing. It's compatible with all traditional Alpine (ISO 5355) and GripWalk boot soles. Look's classic pivot turntable heel design offers 28mm of elastic travel and rotates directly under the tibia, delivering elite-level shock absorption and the industry's most trustworthy retention for a significant reduction in unwanted pre-release. Long Elastic Travel Longer elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Short Mounting Zone The shortened mounting zone provides less swing weight, improved response, and a deeper, rounder, more consistent ski flex. Rolling Control LOOK binding components are designed to deliver industry-leading roll coupling strength (boot-to-binding interface). This ensures minimal roll before the boot engages the binding for the most efficient power transmission in skiing. GripWalk GRIPWALK compatible bindings ensure perfect compatibility with two boot sole standards: - Traditional Alpine soles (ISO 5355) - GRIPWALK soles (future ISO 23223 standard) Full Action Toe Piece Featuring 45mm of elastic travel and 180° multi-directional release, the FULL ACTION toe piece delivers best-in-class retention and release and increased coupling strength (boot-to-binding interface) for maximum power transmission. Multi Directional Release LOOK is the only binding brand to develop a true mechanical upward release that functions independently from the heel for the most effective 180° MULTI DIRECTIONAL RELEASE in the instance of a fall. - Brake Width: 75 - 95mm - Weight: 1115g 1/2 Pair - DIN/ISO: 05-14

The freeride pivot ski binding sets the standard for control and release for the world's most dedicated skiers. The binding's Full Action toe piece and unique "turntable" heel design offer expert freeskiers a responsive connection between boot and ski for instant power transmission and precise ski control. It features powerful shock absorption and travel with confident retention and release for aggressive skiing. It's compatible with all traditional Alpine (ISO 5355) and GripWalk boot soles. Look's classic pivot turntable heel design offers 28mm of elastic travel and rotates directly under the tibia, delivering elite-level shock absorption and the industry's most trustworthy retention for a significant reduction in unwanted pre-release. Long Elastic Travel Longer elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Short Mounting Zone The shortened mounting zone provides less swing weight, improved response, and a deeper, rounder, more consistent ski flex. Rolling Control LOOK binding components are designed to deliver industry-leading roll coupling strength (boot-to-binding interface). This ensures minimal roll before the boot engages the binding for the most efficient power transmission in skiing. GripWalk GRIPWALK compatible bindings ensure perfect compatibility with two boot sole standards: - Traditional Alpine soles (ISO 5355) - GRIPWALK soles (future ISO 23223 standard) Full Action Toe Piece Featuring 45mm of elastic travel and 180° multi-directional release, the FULL ACTION toe piece delivers best-in-class retention and release and increased coupling strength (boot-to-binding interface) for maximum power transmission. Multi Directional Release LOOK is the only binding brand to develop a true mechanical upward release that functions independently from the heel for the most effective 180° MULTI DIRECTIONAL RELEASE in the instance of a fall. - Brake Width: 75 - 95mm - Weight: 1115g 1/2 Pair - DIN/ISO: 05-14

The world's most committed pro riders count on the Pivot 18 GripWalk binding to accomplish their feats and maintain control in all situations. Its Forza 3.0 color conveys a cool attitude. The Pivot 18 Gripwalk is the market benchmark in terms of performance and reliability, thanks to its combination of aluminum and steel parts, its unique pivoting heel and record elastic travel. The Pivot binding is compatible with GripWalk 5355 A and Gripwalk ISO 23223 A adult boot soles. - Pivot, GripWalk, short mounting zone, long elastic travel, race aluminum toe piece, multi directional release, rolling control - Din :8-18 - Toe piece anti-friction: pivot GW AFD - Toe piece type: race - Heel piece system: pivot - Heel piece type: pivot - Brake width: 75-130 mm - Length adjustment: 16 mm - Stand height: 19 mm

The Ambition 12 MN features the benefits of innovative climbing technology, a natural ski flex, plus proven TYROLIA safety features and downhill performance. The Ambition 12 MN is a world-class alpine touring binding with innovative climbing technology, natural ski flex and proven TYROLIA downhill performance. The binding features the AT Toe, which can be easily adjusted to adult Alpine (ISO 5355 TYPE A), adult Walk (ISO 23223 TYPE A) and all Touring ski boots (ISO 9523), plus a 65 mm wide mechanical Anti Friction Gliding Element to provide constant release values. The binding also has a unique lightweight telescopic tube that allows exact centering of the binding on the ski by adjusting it to the appropriate boot sole length before mounting. The state-of-the-art climbing aid (0°/5°/10°/15°) is positioned as close as possible to the Alpine Touring heel, providing better walking balance and effortless climbing in all conditions. Its low stand height of only 38 mm improves stability and offers a confident stance. In short, this touring binding allows a ski to flex naturally, provides constant release values and all the safety and downhill performance expected of a high-end TYROLIA binding. For boot soles from 260 mm to 350 mm. - Brakes not included - Stand Height: 38mm - DIN: 4 - 12 - Weight: 1810g Technologies: - Gripwalk: Accommodates all adult Alpine (ISO 5355 TYPE A) and Walk ski boots (ISO 23223 TYPE A). The height of the AFD needs to be adjusted to the ski boot sole height. Optimal height shall be tested with the boot height adjustment tester. - MN Technology: Accommodates adult Alpine (ISO 5355 TYPE A), adult Walk (ISO 23223 TYPE A) and all Touring (ISO 9523) ski boots. The height of the AFD needs to be adjusted to the ski boot sole height. Optimal height shall be tested with the boot height adjustment tester.

Light, fast, responsive and fitted with the latest safety technology, the EVO 9 GW CA provides junior racers with race-winning performance. Light, fast, responsive and fitted with the latest safety technology, the EVO 9 GW CA provides junior racers with winning performance. With a stand height of 21 mm and a maximum DIN of 9, this race-ready binding is equipped with our SX Lite toe and heel, for unrivalled power transmission, improved kinematics, reduced load on joints and 180° vertical and diagonal friction-free boot release. For race-winning confidence, choose the EVO 9 GW CA. Added benefit: compatible with Alpine Adult and Children ski boots, plus GripWalk and GripWalk Junior ski boots. Additionally, the model is equipped with the PowerBrake, which provides better brake retraction for greater edge angles. To provide outstanding performance and the highest stability for our young speedsters with TYPE C (children) ski boots, we offer a vertical blocked slider as a spare part. ONLY for TYPE C and GripWalk Junior ski boots: AFS SX Jr/Kid – blocked (Type C & GripWalk Junior). - STAND HEIGHT: 21 mm - DIN: 2 - 9 - WEIGHT: 1510 g - SX Lite Toe with TRP System - Full Diagonal - ISO: 5355A, 5355C, 9523 GripWalk - SX LITE Heel - Brake [D] 85 mm

- Stand Height: 33.5 mm - DIN: 4 – 13 - Ski Boot Type: A/GW A - Weight: 2370g Features: - RX jaws with TRP system - AFS - Anti Friction Slider - Full diagonal - PowerRail - HR heel - SET (incl. Twin PR base) - GripWalk - Full Heel Release (FHR) technology

Backcountry skiers require reliable and easy-to-use equipment that can handle a variety of conditions. This durable and trustworthy BCX Auto fulfills those requirements. Easy in and out adds convenience, while a robust 56mm width enhances stability and control.

Backcountry skiers require reliable and easy-to-use equipment that can handle a variety of conditions. This durable and trustworthy BCX Auto fulfills those requirements. Easy in and out adds convenience, while a robust 56mm width enhances stability and control. Step-In The Step-In mechanism makes it extremely easy to step into the binding. You can hear a clear 'click' when the binding is closed properly.

Turnamic Touring binding with very user-friendly entry mechanism and high skiing comfort with maximum stability and ski control. Individual and tool-free adjustment possible in seconds. Easy use The bindings quickly slide onto the plate without the use of tools. When it’s time to ski, the Turn Lock mechanism can be operated even with a gloved hand, making entry and exit easier than ever before. Tunable w/tool-free adjustment Technique, temperature, and snow composition all have an influence on ski performance: With all TURNAMIC models, this completely tool-free adjustment allows skiers to better match their individual needs. Sliding the system forward provides more grip while sliding it back will noticeably improve glide. Dynamic for perfect skiing performance With the optimized setup of the boot-binding-plate-ski components, TURNAMIC gives you dynamic skiing performance like never before. FLOWFLEX technology enables the ski to flex freely, so it performs as it was intended to perform. Turn Lock The ergonomic design of the lever with secure-grip soft components enables intuitive handling when stepping in and out of the binding. Haptic and acoustic response when opening and closing. Protected against unwanted opening. Tool-Free The mounting and positioning works tool-free and is optimized for easy operation even in difficult conditions on the track. A clearly visible value display in the windows next to the adjustment and the sensible latching facilitates positioning. Double Lock Slider Double locking clip for easy and safe fixation and adjustment of the binding on the IFP (Integrated Fixation Plate). Flowflex The two-part plate and the latching with two closely spaced pins not only guarantees double security but also the fixing of the binding at one point. The residual binding housing is floatingly supported over the entire length in the longitudinal direction, whereby the ski performance remains unaffected. Torsion-Proofed Body The well-thought-out (in all details) housing construction with broad contact surface and torsionally stiff geometry is the basis for direct power transfer. Previously unattainable ski control and forward thrust go hand in hand with low weight. Low Profile The minimalistic design height ensures a low stand position and maximum stability as a result. This means a more stable gliding phase and a direct feel or the snow at the same time. Step-In The Step-In mechanism makes it extremely easy to step into the binding. You can hear a clear 'click' when the binding is closed properly. Heel Pre-Adjust Adjustable heel section where the boot size is pre-selected using snap hooks on the heel rails. The heel is automatically positioned with it when the position is adjusted so no separate adjustments are necessary later. Classic Flexor Flexor developed for classic style with flex grade 7.0 and slightly progressive power flow. Pre-load technology ensures the best ski control from the beginning of the motion. 45° working angle (amplitude), tool-free changeover, secure fit inside binding housing and low-wear material are what make this high-performance absorber stand out.

The MOVE Switch Kit IFP combined with a manual classic binding is for those who want to use the advantage of the tool-free adjustment without taking off the skis. With the rotating lever you can easily move your binding 12mm forwards for better grip and up to 24mm backwards for better glide, without stepping off the binding. The MOVE Switch Kit IFP fits all skis with pre-mounted TURNAMIC IFP plate. - S58122

Excellent power transfer, stability, and control for excellent junior classic skiers. Quick and easy individualization adds every possible advantage no matter what the race conditions. FLOWFLEX technology allows binding to flex with the ski for optimal power transfer. Turn Lock The ergonomic design of the lever with secure-grip soft components enables intuitive handling when stepping in and out of the binding. Haptic and acoustic response when opening and closing. Protected against unwanted opening. Tool-Free The mounting and positioning works tool-free and is optimized for easy operation even in difficult conditions on the track. A clearly visible value display in the windows next to the adjustment and the sensible latching facilitates positioning. Clip Lock Clip for easy fixation and adjustment of the binding on the IFP (Integrated Fixation Plate). Flowflex The two-part plate and the latching with two closely spaced pins not only guarantees double security but also the fixing of the binding at one point. The residual binding housing is floatingly supported over the entire length in the longitudinal direction, whereby the ski performance remains unaffected. Torsion-Proofed Body The well-thought-out (in all details) housing construction with broad contact surface and torsionally stiff geometry is the basis for direct power transfer. Previously unattainable ski control and forward thrust go hand in hand with low weight. Low Profile The minimalistic design height ensures a low stand position and maximum stability as a result. This means a more stable gliding phase and a direct feel for the snow at the same time. Heel Pre-Adjust Adjustable heel section where the boot size is pre-selected using snap hooks on the heel rails. The heel is automatically positioned with it when the position is adjusted so no separate adjustments are necessary later.

Proven TURNAMIC skate binding developed for World Cup athletes allows them to precisely position the binding, quickly and without tools. FLOWFLEX technology allows binding to flex with the ski for optimal power transfer. Turn Lock The ergonomic design of the lever with secure-grip soft components enables intuitive handling when stepping in and out of the binding. Haptic and acoustic response when opening and closing. Protected against unwanted opening. Tool-Free The mounting and positioning works tool-free and is optimized for easy operation even in difficult conditions on the track. A clearly visible value display in the windows next to the adjustment and the sensible latching facilitates positioning. Double Lock Slider Double locking clip for easy and safe fixation and adjustment of the binding on the IFP (Integrated Fixation Plate). Flowflex The two-part plate and the latching with two closely spaced pins not only guarantees double security but also the fixing of the binding at one point. The residual binding housing is floatingly supported over the entire length in the longitudinal direction, whereby the ski performance remains unaffected. Torsion-Proofed Body The well-thought-out (in all details) housing construction with broad contact surface and torsionally stiff geometry is the basis for direct power transfer. Previously unattainable ski control and forward thrust go hand in hand with low weight. Stabilizer The shape of the Race Pro Skate housing keeps the ski balanced horizontally after every kick. Perfect ski control – even when the ski is in the air. Low Profile The minimalistic design height ensures a low stand position and maximum stability as a result. This means a more stable gliding phase and a direct feel for the snow at the same time. Heel Pre-Adjust Adjustable heel section where the boot size is pre-selected using snap hooks on the heel rails. The heel is automatically positioned with it when the position is adjusted so no separate adjustments are necessary later. Skating Flexor Flexor developed for skating style with flex grade 11.0 and progressive power flow. Pre-load technology ensures the best ski control from the beginning of the motion. 40° working angle (amplitude), tool-free changeover, secure fit inside binding housing and low-wear material are what make this high-performance absorber stand out.

Junior race binding for skating use. Ideally suited for the young professionals thanks to high control over the ski, as well as top stability and power transmission. The possibility of individual customization within seconds fully corresponds to the characteristics of a professional binding in the World Cup. - S70022

The TURNAMIC Race Classic is a high-performance binding for Classic skiers and racers looking for every advantage. A redesigned flexor has improved the step-in function of the binding and the Double Lock Slider operation has been made easier to allow for quick and easy adjustment of the binding position to match technique and conditions. - High-performance Classic binding - Easy step-in entry - Tool-free adjustment Technology - Turn Lock - Tool Free - Double Lock Slider - Flowflex - Torsion-Proofed Body - Low Profile - Step-In - Heel Pre-Adjust - Classic Flexor

The high-stability touring binding Control Step-In allows easy and fast tool-free adjustments of the binding position to match terrain and conditions. A redesigned flexor allows for easier step-in entry. Easy use The bindings quickly slide onto the plate without the use of tools. When it’s time to ski, the Turn Lock mechanism can be operated even with a gloved hand, making entry and exit easier than ever before. Tool-free adjustment Technique, temperature and snow composition all have an influence on ski performance: With all TURNAMIC models, this completely tool free adjustment allows skiers to better match their individual needs. Sliding the system forward provides more grip, while sliding it back will noticeably improve glide. Dynamic - perfect skiing performance With the optimized setup of the boot-binding-plate-ski components, TURNAMIC gives you dynamic skiing performance like never before. FLOWFLEX technology enables the ski to flex freely. The more easygoing skier appreciates perfect control. Technologies: Turn Lock The ergonomic design of the lever with secure-grip soft components enables intuitive handling when stepping in and out of the binding. Haptic and acoustic response when opening and closing. Protected against unwanted opening. Tool-Free The mounting and positioning works tool-free and is optimized for easy operation even in difficult conditions on the track. A clearly visible value display in the windows next to the adjustment and the sensible latching facilitates positioning. Double Lock Slider Double locking clip for easy and safe fixation and adjustment of the binding on the IFP (Integrated Fixation Plate). Torsion-Proofed Body The well-thought-out (in all details) housing construction with broad contact surface and torsionally stiff geometry is the basis for direct power transfer. Previously unattained ski control and forward thrust go hand in hand with low weight. Step-In The Step-In mechanism makes it extremely easy to step into the binding. You can hear a clear 'click' when the binding is closed properly. Heel Pre-Adjust Adjustable heel section where the boot size is preselected using snap hooks on the heel rails. The heel is automatically positioned with it when the position is adjusted so no separate adjustments are necessary later. Classic Flexor Flexor developed for classic style with flex grade 7.0 and slightly progressive power flow. Pre-load technology ensures the best ski control from the beginning of the motion. 45° working angle (amplitude), tool-free changeover, secure fit inside binding housing and low-wear material are what make this high-performance absorber stand out.

The TURNAMIC Race Skate is a high performance binding for Skate skiers and racers looking for every advantage. A newly added stabilizer ridge provides a solid connection between the boot and binding for maximum power transfer and precise control. The Double Lock Slider operation has been improved for quick and easy adjustment of the binding position. - High-performance skate binding - Easy step-in entry - Tool-free adjustment Technology - Turn Lock - Tool Free - Double Lock Slider - Flowflex - Torsion-Proofed Body - Low Profile - Step-In - Heel Pre-Adjust - Skating Flextor

The Atomic Shift 10 MNC is the same binding as its bigger brother – with slightly lower DIN options. It's still the world's first binding with full touring and freeride capability in one. It's a genuine tech binding for hiking complete with pins. Flick the hike/ride switch to ski mode and it turns into a genuine freeride binding for the way down, compatible with all normed boots on the market – alpine and touring. No need to compromise when you're touring or skiing the resort– either by hiking with a heavy solution like frames or skiing downhill with pins. You get the best for both. And even better, you can also use it for your alpine skiing days with your normal alpine boot. Finally, one binding for everything! BINDING ADJUSTMENT VALUE 4 - 10 TECH FEATURES - Hike and Ride Switch - Low Profile Chassis - Crampon Compatible - Oversized Platform - Toe Height Adjustment - Automatic Wing Adaptation - Easy Step-in - Locking Brakes - Carbon-infused PA material - Crampon Shift 100/120mm

The Atomic Shift 13 MNC is a game-changer: the world's first binding with full touring and freeride capability in one. It's a genuine tech binding for hiking complete with pins. Then flick the hike/ride switch to ski mode and it turns into a genuine freeride binding for the way down, compatible with all normed boots on the market – alpine and touring. So, for the first time, you don't have to compromise when you're touring or skiing – either by hiking with a heavy solution like frames or skiing downhill with pins. You get the best for both. And even better, you can also use it for your alpine skiing days with your normal alpine boot. Finally, one binding for everything! BINDING ADJUSTMENT VALUE 6 - 13 TECH FEATURES - Hike and Ride Switch - Low Profile Chassis - Crampon Compatible - Oversized Platform - Toe Height Adjustment - Automatic Wing Adaptation - Easy Step-in - Locking Brakes - Carbon-infused PA material - Crampon Shift 100/120mm