Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Rigid

$67.69
• Cantilever brake mounts • 45mm rake • High-tensile steel construction • Threaded fork
$53.99 - $62.99
• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm • For bikes with 26-inch wheels
$219.95 - $249.95
The Ritchey Comp Carbon Road Fork was designed for how you love to ride. Built with High Modulus Fiber (HMF), this choice road fork offers superior strength. It's strong without sacrificing a pleasurable road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers have been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as best as possible in the areas in which they occur, such as side load, torsion, and impact. - Material: carbon blades / alloy steerer, crown, and dropouts - Steerer length: 300mm - Axle-crown: 368mm - Rake/Offset: 43mm - Crown diameter: 34mm (1") - 45mm (1-1/8") - Spacing: 39mm - Minimum tire clearance: 4mm - Wheel compatibility: 700c - Weight: 540g (with uncut steerer) - Color: UD carbon finish (1-1/8") - 3K carbon finish (1")
$4.99 $10.00 50% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$179.99
- Tange Infinity CrMo steel unicrown fork for 26 MTB wheels - Suspension corrected for 80mm travel 26 frames 40mm rake - All have 51mm International Standard disc mount
$269.99
Matching fork for the Soma Jawbone B-Type frame. - Tange CrMo steel - Fits QR hubs - Axle to Crown: 425mm - Rake: 50mm - IS disc mounts, rotor fit up to 180mm - Two sets of cargo cage bosses per leg, pannier rack bosses on inside and outside leg - Two sets of fender/rack eyelets at fork ends - 29" tire clearance: 2.25" - 27.5" tire clearance: 2.8" - 350mm Steerer Tube If you are getting this fork for the Jawbone, you need a ZS44 headset. Can be used as a rigid fork on some early 90's mountain bikes.
$169.99 - $189.99
Laterally stiff and fine riding steel-lugged cross fork. Features a sloping lugged crown with cutouts on outside tangs, long inside tangs, and an International Standard disc tab. - Tange Infinity chromoly steel blades and steerer - Rack eyelets for fenders and braze-ons for low-rider panniers - 1 1/8" threadless steerer - 350mm long steerer - 44mm rake - 400mm axle to crown - 60mm inside width - Lugged Cross fork to match Double Cross Cyclocross frames - Lugged crown with Tange CrMo construction - Features eyelets for front rack and braze-ons for low-rider panniers
$229.99
- Tange Infinity CrMo steel fork for 27.5" (650b) or 29" MTB wheels - Suspension corrected for 100mm travel 29er frames or 120-130mm 650b frames - Unicrown with straight D-shaped blades
$169.99
- Tange Infinity CrMo steel blades with D-shaped cross-section - Fender eyelets at fork tips - Low rider pannier rack boess - Premium Cyclocross fork with CrMo blades - Choose disc or cantilever brake options - 300mm steerer (uncut) 30.0mm race 44mm straight rake fork - Designed to match the Soma Double Cross disc frame - Steerer 1-1/8" and 1", 350mm long, CrMo - Axle to crown 400mm - 44mm rake
$189.99
- Premium Cyclocross fork with CrMo blades - 300mm steerer (uncut) 30.0mm race 44mm straight rake fork - Designed to match the Soma Double Cross disc frame - Designed for disc brakes, 160mm rotors (International mount) - Straight blade design with D-shaped cross-section blades - Tange Infinity CrMo steel - 350mm 1-1/8" steerer - 400mm axle to crown - Two sets of fork-tip eyelets - Low rider pannier rack eyelets - 60mm inside width
$289.99
- Tange Infinity CrMo steel fork for 27.5 (650b) or 29 MTB wheels - Suspension corrected for 100mm travel 29er frames or 120-130mm 650b frames - Unicrown with straight D-shaped blades International Standard disc mount - 47mm rake - Mini Rack Mounts
$259.99
- Unicrown design with Tange Infinity CrMo steel tubing - Single eyelets pannier rack mounts and mini rack mounts - Fits 700c x 45mm tires with fenders - 15x100mm thru axle and International Standard disc brake mount
$279.99
A tough unicrown fork option for the Soma Wolverine and other gravel/CX frames with a 1-1/8" headtube. Version 3 model has a new fork end design and adopts the flat mount disc standard - Unicrown design with Tange Infinity CrMo steel tubing - Triple bosses on fork leg to fit low rider pannier rack or cage - Fits 700c x 45mm tires with fenders
$329.95
With vibration-muting carbon blades, and alloy steerer and crown, the Comp carbon/alloy cross and road fork is ideal for cyclocross pursuits or road riding. - Material: carbon blades / alloy steerer, crown, and dropouts - 1-1/8" straight steerer - Steerer length: 300mm - Axle-crown: 391mm - Rake/Offset: 48mm - Crown diameter: 45mm (1-1/8") - Spacing: 57mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Fender mounts
$599.95
With more than 40 years of designing and building bicycles and components dedicated to adventures that go beyond limits or expectations, Tom created the new Ritchey WCS Adventure Fork for those of us that are unbound by the constraints of riding-surface type, seemingly insurmountable distances, or what you can carry on your bike. The new one-piece carbon monocoque WCS Adventure Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, deliver a high level of comfort, and offer practical features for all manner of cycling adventures. Built with High Modulus Fiber (HMF), this impeccable adventure fork offers superior strength while also reducing road chatter fatigue on those endless days and nights in the saddle. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from the crown to the shaft and offers increased impact strength for those potholes you didn't see. With your desire to ride far and long in any condition or under any circumstance, the WCS Adventure Fork features rack mounts for packs full of gear and fender mounts to keep the grime off you and your bike. The three multi-purpose mounts on the legs give you more places to stow the necessities you gather at the last cafe. Welcoming flat-mount disc brake calipers, the WCS Adventure Fork also fits up to 48mm tires (depending on tire make and model)—making this fork the ultimate addition to any rig assembled for the purpose of seeking, discovering, and enjoying the adventure. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included)—(100x15mm thru-axle conversion kit available separately) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Axle-Crown: 393mm - Rake/Offset: 50mm - Spacing: 60mm - Minimum tire clearance: 4mm Road / 6mm Off-Road - Wheel compatibility: 700c / 650b - Rack and fender mounts - Multi-purpose mounts on fork blades (includes black stainless-steel bolts) - Fork max payload: 3kg per side - Weight: 445g (with uncut steerer / not including axle)
$449.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Canty Fork is designed for the rigors of cyclocross and those who demand traditional canti brakes. Decades of experience between the course tape and building the bikes and components designed to win inform the performance and design details of this fork. It employs a monocoque construction, and it's compatible with standard and integrated headsets. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - Steerer length: 300mm - Fork length: 395mm - Rake/Offset: 45mm - Crown diameter: 45mm - Spacing: 54mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 448g (with uncut steerer / not including axle)
$579.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount. - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: Tapered 1-1/8 – 1.5-inch - Rake: 45mm - Blade Shape: Curved - Drop out: Carbon - Rotor size: 140mm (160 w/ adapter) - Crown Diameter: 45mm - Integrated 45-degree crown race - Axle-to-Crown: 395mm - Finish: Matte UD carbon - Weight: 440g (w/ uncut steerer) - Compression plug included
$699.95
You love the accuracy, efficiency, and trail feedback that only a rigid mountain bike fork can provide. And, of course, you love carbon fiber. The Ritchey WCS Carbon Mountain Bike fork was made for you and your riding style. Our deep mountain biking heritage, decades of on-trail research, and mastery of modern materials come together to provide a fork that offers an unrivaled riding experience. The one-piece monocoque construction (WCS) of this fork also includes full carbon dropouts as well as non-removable, one-piece carbon disc brake tabs. This fork also features suspension-corrected axle-crown height, plus a Ritchey compression plug is included. - Material: carbon fiber - Quick release (not included) - Post Mount disc brake - Disc brake rotor compatibility: 160mm (max 180mm) - Steerer length: 300mm - Crown diameter: 50mm (straight 1-1/8”) – 61mm (tapered 1-1/2”) - Fork lenght: 459mm (27.5”) - 470mm (29”) - Rake/Offset: 42mm (27.5”) – 45mm (29”) - Spacing: 87mm - Minimum tire clearance: 6mm - Weight: 615g (with uncut steerer / not including axle)
$499.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands, including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape and building the bikes and components designed to win inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and it features carbon dropouts and post disc mount. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - Quick release (not included) - Post Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 45mm (1-1/8") - Fork length: 395mm - Rake/Offset: 45mm - Spacing: 54mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 410g (with uncut steerer / not including axle)
$499.95
The one-piece carbon monocoque WCS Carbon Road Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, offering a comfortable yet lively riding experience. Built with High Modulus Fiber (HMF), this impeccable road fork offers superior strength and a superb road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers have been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as best as possible in the areas in which they occur—such as side load, torsion, and impact. The WCS Carbon Road Fork features a 46mm rake and includes a compression plug. It also fits up to 30mm tires, depending on tire make and model. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - Steerer length: 300mm - Axle-crown: 371mm - Rake/Offset: 46mm - Crown diameter: 46mm - Spacing: 40mm - Minimum tire clearance: 4mm - Wheel compatibility: 700c - Weight: 350g (with uncut steerer)
$619.95
With nearly 50 years of designing and building bicycles and components dedicated to adventures that go beyond limits or expectations, Tom created the new Ritchey WCS Adventure Fork for those of us that are unbound by the constraints of riding-surface type, seemingly insurmountable distances, or what you can carry on your bike. The new one-piece carbon monocoque WCS Adventure Fork with a tapered steerer has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, deliver a high level of comfort, and offer practical features for all manner of cycling adventures. Built with High Modulus Fiber (HMF), this impeccable adventure fork offers superior strength while also reducing road chatter fatigue on those endless days and nights in the saddle. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from the crown to the shaft and offers increased impact strength for those potholes you didn’t see. With your desire to ride far and long in any condition or under any circumstance, the WCS Adventure Fork features rack mounts for packs full of gear and a fender mount to keep the grime off you and your bike. Three multi-purpose mounts on the legs give you more places to stow the necessities you gather at the last cafe. Welcoming flat-mount disc brake calipers, the WCS Adventure Fork also fits up to 52mm tires (700c) or 2.4” tires (650b) - depending on tire make and model – making this fork the ultimate addition to any rig assembled for the purpose of seeking, discovering and enjoying adventure.
$119.99
- Add a disc brake to any track bike with IS disc mounts for 160mm rotor - Straight legs with unicrown CrMo construction - 300mm CrMo steerer - Forward facing dropouts for easy wheel removal - Black fork is designed to match the Pake Rum Runner Track frames
$109.99
- Designed to match the Pake Rum Runner Track frames - Straight legs with unicrown CrMo construction - 300mm CrMo steerer with 38mm rake
$359.95
Lightweight, stiff, compliant, and available in three sizes to give you more choices for converting your bike over to rigid. With 34mm carbon legs and forged aluminum crowns and dropouts, the Rock Solid family of forks will make your machine a precise, feather-weight, singletrack screamer. 490mm, 465mm, and 445mm models are available. - Designed for 26", 27.5", or 29" wheel MTB applications, disc only (74mm post-mount) - 34mm carbon legs with forged aluminum crown and dropouts - Max Rotor Size 185mm or may void the warranty - 3 different sizes for optimal ride height.
$359.95
Lightweight, stiff, compliant, and available in three sizes to give you more choices for converting your bike over to rigid. With 34mm carbon legs and forged aluminum crowns and dropouts, the Rock Solid family of forks will make your machine a precise, feather-weight, singletrack screamer. 490mm, 465mm, and 445mm models are available. - Designed for 26", 27.5", or 29" wheel MTB applications, disc only (74mm post-mount) - 34mm carbon legs with forged aluminum crown and dropouts - Max Rotor Size 185mm or may void the warranty - 3 different sizes for optimal ride height.
$419.95
Lightweight, stiff, compliant, and available in three sizes to give you more choices for converting your bike over to rigid. With 34mm carbon legs and forged aluminum crowns and dropouts, the Rock Solid family of forks will make your machine a precise, feather-weight, singletrack screamer. 490mm, 465mm, and 445mm models are available. - Designed for 26", 27.5", or 29" wheel MTB applications, disc only (74mm post-mount) - 34mm carbon legs with forged aluminum crown and dropouts - Max Rotor Size 185mm or may void the warranty - 3 different sizes for optimal ride height.
$419.95
Lightweight, stiff, compliant, and available in three sizes to give you more choices for converting your bike over to rigid. With 34mm carbon legs and forged aluminum crowns and dropouts, the Rock Solid family of forks will make your machine a precise, feather-weight, singletrack screamer. 490mm, 465mm, and 445mm models are available. - Designed for 26", 27.5", or 29" wheel MTB applications, disc only (74mm post-mount) - 34mm carbon legs with forged aluminum crown and dropouts - Max Rotor Size 185mm or may void the warranty - 3 different sizes for optimal ride height.
$399.99
The MCX Max is a monster cross/gravel carbon fork with clearance to fit 29 x 2.1" tires and 27.5" x 2.25" tires - with practical mud clearance. Extra long 350mm aluminum steerer (Most carbon forks have steerers only 280-300mm long) NOTE: Newer stock will come with a thru-axle bolt instead of a thru-axle with QR cam lever (There are also two lighter MCX models that have straight 1-1/8" steerers and are available in QR or thru-axle. ) – Axle to crown: 406mm – Rake: 50mm – 15mm x 100 thru-axle – Disc brake mount: Flat mount – Internal cable routing – 3-pack mount accessory bosses (3kg capacity per leg) – Single set of fender eyelets – Steerer: Aluminum, 1-1/8"-1-1/2" tapered x 350mm – Weight: 970g (including thru-axle and extra long uncut steerer)
$319.99
The MCX TA is a monster cross/gravel carbon fork with clearance to fit 29 x 2.0" tires and 27.5" x 2.1" tires. Extra long 350mm steerers fit most 62+cm frames NOTE: Newer stock will come with a thru-axle bolt instead of a thru-axle with QR cam lever (The MCX also comes in a configuration for standard QR hubs. There is an MCX Max model that is burlier with a tapered steerer, thru-axle, and even more tire clearance) – Axle to crown: 406mm – Rake: 50mm – 15mm x 100 thru-axle – Brake mount: Flat mount disc – 3-pack mount accessory bosses (3kg capacity per leg) – Single set of fender eyelets – Steerer: Aluminum, 1-1/8" x 350mm – Weight: 870g (Including thru-axle and uncut steerer) – Matte Black and limited edition Moss Green to match the Soma Wolverine B-Type frame
$199.99
- Ideal for the rider using 20mm thru-axle suspension fork that wants to go rigid, without buying a new front wheel - Exclusive 20mm axle with 14mm nutted ends for running a thru-axle hub with pegs - Lightweight and strong butted 31.8mm 4130 CrMo straight blades with shallow radius leg bends - Internally and externally butted steerer reduces weight, minimizes stress risers - 6mm thick CNC machined dropouts, axle slots aligned toward vector of impact - 51mm International Standard disc mounts and 20/14mm nutted axle set included. 3.1lbs (200mm uncut)
Page 1 of 2 Next page