12- to 24-Inch

Box One™ 120 TPI Folding Tires were engineered with a minimalist approach to hit lofty goals for weight, traction, rolling resistance, and rebound. At its heart is a super-supple 120TPI casing where we forced in as much rubber displacing nylon as possible. Skin walls are employed to reduce drag and further reduce weight. We flanked the high-density casing with a tightly packed hoop of aramid fibers. Finally, we draped this all with BMX race-specific tread that transitions from a center band with a large contact patch to unidirectional tactile knobbies on the sides. This aggressive combination allows for maximum traction out of the gate, immense adhesion in the corners, and low rolling resistance in the straights. A state-of-the-art mixture of compounds is used in various areas of the apex, wall, bead seat, and center – with higher silica content in the tread to again remove more weight. Note: Not a tubeless tire FEATURES: - 120 TPI High-Density Casing - Aramid Folding Bead - High-Traction Directional Grooves for Starting Gate Grip Point - Low Rolling Resistance Center Strip Chevrons - Countless Ramped Hexagonal Directional Knobbies

The Mirage tire is built on the premise of a super-lightweight tire that was strong enough for the toughest street riders. The Mirage uses a high-performance 120tpi casing and a specially designed dual-compound tread that is smooth in the center, but with plenty of grip on the outer tread for traction and control while cornering and carving. The Mirage was also designed with street riders in mind and uses a full bead-to-bead "Silkshield" protection layer and a special outer ridge which acts like a bumper and prevents the sidewall getting damaged during grinds. - High-performance lightweight street tire - Dual-compound construction - Full-length "Silkshield" layer under tread and sidewalls for added protection - Specially designed tire tread with a smooth center tread for low rolling resistance and aggressive sides for traction and grip - Special outer line for grind protection - Made by Maxxis tires

-Flatland/freestyle oriented tread

From pro-level race bikes to sport, fitness and adventure bikes, Giant delivers the benefits of tubeless tire technology to riders of all types. Features - Fast-rolling gravel tread design with enhanced traction on loose surfaces - Tubeless Ready design allows for reduced air pressure to enhance comfort and reduced risk of punctures - Supple, 60 TPI casing for better performance and control - Tread compound optimized for 30% pavement, 70% gravel or dirt road riding - Wire Bead

Basic tires can still offer a great ride. Giant's Comp III tires feature knobby tread for off-road action and a durable rubber compound.

Designed by former World Champion, Olympic silver medalist and G.O.A.T contender Sam Willoughby, the Siren Pro offers BMX racers unparalleled performance on any track. Lightweight and fast-rolling, the 120 TPI, tubeless-ready tire rails turns, smooths out technical straightaways, and provides insane grip on the gate and out of corners. - Supple 120 TPI shaped casing - Center slick design for gaining maximum speed - Super-narrow gaps in the center tread grip the start gate without flexing - Wider gaps on the shoulder provide max grip when cornering

Kenda K1247 Amrak Tire - Clincher - Wire bead - 30tpi

The Comp III in K50 Tread is a great tire for any BMX or kid's bike. - K50 tread pattern - Made from quality Kenda rubber

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda Kwest High Pressure Road tire is designed with a smooth rounded tread with large water dispersion grooves. - The Kwest High Pressure Road Recumbent tire is constructed of a steel bead and rates at a max of 100 PSI

Kenda K-Rad - Checkerboard-shaped knob design - Knurled tread surface for traction and control - Ribbing between knobs strengthens the casing - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

For the next generation of riders. Evenly spaced knobs make for predictable riding characteristics and give beginners confidence on their trail adventures. The large volume casing provides extra damping and comfort.

- Ultimate XC Racing tire with lots of speed and grip - Well suited for a variety of riding conditions. - Fast accelerating, hard-pack cross-country tire - Numerous knobs provide multiple contact points with the ground

The Country Jr. is an affordable tire that has a smooth-rolling center ridge and aggressive shoulder lugs for secure traction on loose surfaces. - Long-wearing smooth center ridge rolls fast on pavement, while shoulder lugs provide traction in loose conditions

The Country Jr. is an affordable tire that has a smooth rolling center ridge and aggressive shoulder lugs for secure traction on loose surfaces. - Long-wearing smooth center ridge rolls fast on pavement, while shoulder lugs provide traction in loose conditions

- An uncompromising tire for BMX race wins - Tubeless Ready technology reduces rolling resistance for optimal performance - The MICHELIN Pilot SX has been designed for extra grip while cornering, particularly on hard-packed or dusty terrain

- An uncompromising tire for BMX race wins - Tubeless Ready technology reduces rolling resistance for optimal performance - The MICHELIN Pilot SX Slick's central tread and the design of the side blocks help maintain momentum

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Stare down rough terrain with this burly yet sleek tire. The Utility Player offers comfortable off-road exploration with modern, openly spaced treads and wide 2.25-inch casing. A broad spectrum of diameters gives you choice for fit. You still standing there? - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Tightly spaced knobs for dirt use - Bidirectional - Engineered for BMX tracks, trail riding, and dirt jumping - Front or rear - Full Square-knob design Staggered, tightly spaced center lugs provide control at speed. The knob spacing increases near the shoulder lugs to produce two channels that hook up on both hardpack berms and loose dirt on the trails.

Dirt-to-pavement versatility - BMX, urban assault, or dirt jump - Inverted knob design The Holy Roller is one of those "set-it-and-forget-it" tires. Mount up a pair of Holy Rollers on your BMX or DJ bike and you'll be ready for the next session no matter where it's happening—dirt, street, or park.

Tough enough for the meanest streets - Durable enough for urban assault, park riding, commuting, cargo bikes, etc. - Grooved slick tread design - Wrap-around tread pattern As the original urban assault tire, we designed the Hookworm to take the abuses of the most aggressive street riders. Bead-to-bead tread provides durability and traction whether you're dropping staircases, grinding rails, or riding in your local skate park.

Dirt-to-pavement versatility - BMX, urban assault, or dirt jump - Inverted knob design The Holy Roller is one of those "set-it-and-forget-it" tires. Mount up a pair of Holy Rollers on your BMX or DJ bike and you'll be ready for the next session no matter where it's happening—dirt, street, or park.

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Lightweight freestyle tire - BMX and urban assault options - Fast-rolling tread design - High-volume casing The Grifter is our most popular freestyle tire, and for good reason. The tread pattern rolls fast to help you keep your momentum, and the high-volume casing softens landings. The Grifter is perfect for BMX and urban assault.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.