Tools & Tuning

Quality paper for all-round use. Large roll, 40 m/130 feet.

All-round brush for brushing all kinds of hot wax.

Coarse diamond grindstone, grade #200. 100 mm. Used to bevel and tune sharp and precise edges on alpine skis and snowboards. This is one of the two grindstones that can do “everything” within this category. - Diamond file - For snowboards and alpine skis - For alpine skiers and snowboarders - Sharp and exact

Mount the Swix T0014HPS-2 on a drill with a minimum rotation speed of 1500 rpm. Then attach the horsehair brush to the handle. Move the brush in overlapping movements from the tip to the back.

Universal glide wax that provides great glide quickly and easily. Cold universal glide wax for prepping workshops. Quality wax that gives off minimal emissions and is therefore great for the ski store environment. - Universal glide wax - For cold conditions - For those who want a better skiing experience - High durability

Superb in changing conditions! Klister for competition and training. - Racing klister - Temperature range -3°C to +5°C - For competitive athletes - Superior klister in changing conditions KN44 Nero klister can handle changing snow conditions very well and it has great anti-icing properties. Temperature range -3°C to +5°C (27°F to 41°F). SWIX Nero are revolutionary klisters with a black ingredient that has shown an impressive performance. They collect significantly less dirt from the snow than traditionally klisters. They are durable and stay better within the kick-zone than other klisters. NERO provides a secure kick over longer time than traditional klisters, due to their special characteristics.

The Center piece of the Swix 3 piece Backcountry vise is the most important product and can be combined with your existing end supports if you already have a Swix standard vise. Made of light and durable ballistic plastic. - Easy to use - Vise for ski prepping - For backcountry skis. - Ski prepping tool. - Swix made. - Light and durable.

Swix skin wax for backcountry and alpine touring. - To be applied on skins. - For all snow conditions. - Aerosol with applicator.

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

Natural cork for polishing Cera F and glide wax. Used to cork wax into the base.

Coarse Diamond Stone with plastic support. Red. 100 mm. Deburring and maintenance stone. Works great for maintaining sharpness and smoothness. Good price.

Extra-fine Fibertex. Flint abrasive particles. White. Pack of three sandpapers 110 x 150 mm. Used on new skis and newly-structured skis to remove the smallest polyethylene microfibers. Polishes the base completely smooth and even. Also used as a final finish after using Grey Fibertex (T0264N) or Violet Fibertex (T0266N). - Nylon pad with abrasive particles - Removes microhairs from the base - For all ski waxers - Gentle and effective

PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply

Adjustable file guide from 0.5° to 2.0°. - Adjustable racing file guide 0.5° to 2.0° - Easy to adjust the angle - For skiers and service personnel. - Robust design.

For clean removal of wax residue from ski grooves.

Extremely durable base wax! Basebinder kick wax for transformed and old snow. Improved wear on kick wax. A durable base wax for all hard waxes in colder conditions than -1°C (30°F). To be used when the snow has been transformed (granular) and the wear on the wax is high. Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

Replacement blade for sidewall cutters. - Replacement blade - For sidewall cutter - For alpine skiers and snowboarders - Sharp and durable

Fluor Free The F4 series of universal gliders gives you good glide quickly and easily. - Easy wax for all conditions - No iron needed F4 Universal All Temperature Paste wax on tube. For skis and snowboards. All snow conditions. With foam applicator. Apply and go! Special tip: Use F4 Combi Brush (T0166B). Polish with the felt and then brush lightly. Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

Our definitive best-seller! Universal silver klister for recreational and racing skiers. Gives a great kick. Temperature range +10°C to -3°C (50°F to 27°F). For coarse, granular snow changing from wet to crust. A very popular and "flexible" klister. Improved flexibility toward fine-grained moist snow, without icing up. Improved grip on wet, coarse-grained snow. Improved "feeling". To be applied as the final layer of klister. Comparable to the old, famous VM-klister from 1982. Frequently used in World Cup competition. Scraper included.

Aluminum World Cup file guide for base edges, 0.5°. - File guide - For filing base edges - For alpine skiers and snowboarders - Extremely precise

Racing file guide for side edges, made of hard aluminum. 88° - Tool for side edges - For filing steel edges - For alpine skiers and snowboarders - Extremely precise

Kick wax in the classic V-Line, perfect for both touring, training, and racing. Excellent grip. - New fallen snow 0°C to +3°C (32°F to 37°F). - Old fine-grained snow +1°C to -1°C (34°F to 30°F). For wet new snow up +3°C (38°F) and down to -1°C (30°F) in older more transformed granular snow. Apply thicker the warmer it is to secure grip. The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.

Great in challenging conditions! Universal silver klister for recreational and racing skiers. Gives a great kick. Temperature range +3°C to -5°C (38°F to 23°F). A very flexible klister, working on both sides of freezing when conditions are changing between coarse and transformed moist to wet fine-grained snow. Scraper included.

Fixation device for cross country skis (skating and classic) with slightly larger support area than the Ski Vise Nordic. Secures with adjustable centre part directly on the binding. Compatible with all current binding models. Good space saving alternative to a Cross Country Profile.

Speed brick universal biodegradable universal wax 180 gms. The perfect powder day wax…enough said. Temperature range: all temperatures. - Extremely versatile alpine wax - Popular among snowboarders and freeriding

Designed specifically for longer distances on newer and clean snow. Excellent in warm conditions, but also very competitive at lower temperatures. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C.

Used for klister application or to remove wax or klister from the base before cleaning with Base Cleaner.

Attach the Fibertex to an oval or rectangular brush. Move the brush back and forth on the surface of the base. When the gray lining is gone, you’re done. For removing microhairs we recommend approx. 50 brush strokes back and forth. - Pack of three sandpapers 110 x 150 mm - Aluminum oxide abrasive particles

The ideal brush when applying any F4 product. White felt for spreading the F4 product evenly on the base and for polishing. The nylon for brushing and removing excess wax from the structure. This process will increase the durability of any F4 product. Good quality. - For training and competitions - Fluorine free and 100% biodegradable - Thoroughly tested on several types of conditions