Bells/Noise Makers

Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.

The original model of our mountain bike bell, Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. It includes two separate o-rings to fit all handlebar sizes and is easy to move between bikes. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life. - We've also upgraded the backing pad to a much grippier rubber that prevents the bell from movement while shifting between ring modes. The new pad is much more durable than the old pad and won't wear out.

Let 'em know you're coming with a retro Nutcase bike bell. Thumb lever provides a traditional ringer sound. - Mount Location: Handlebar

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters

• Adjustable quick-release strap • Ideal for MTB handlebars • Fits 20-32mm handlebars

Medium sized bells with exciting and classic designs to fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!

- Uses one 9v battery (not included) - Fits most handlebars

•Handlebar mount •Fits most bikes •Alloy ringer style bell •53mm

- Alloy lever action safety bells perfect for kids bikes - Sturdy alloy construction with an adorable insect or animal on top

Let everyone know your coming with Sunlite's Big Ben Jr. Bell. A simple spin makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

•Classic Bugle design •Clamp fits most handlebars

Let everyone know your coming with Sunlite's Candy Mini Bell. It comes in a variety of colors to match your bike and gives you a resounding "ping." It fits most bars and can be used right or left handed.

•Great novelty Horn / Bell combination •Combination of Ringer bell and Squeeze horn •Fits most handlebars

•Combines Ping bells and streamers •One bell on each end of the handlebar •Mounts inside handlebar under grips •Optional hand held use

•Lightweight, compact design •Easy-read compass •Alloy construction

Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

- Adjustable handlebar mount - Universal nylon clamp - Ringer style bell - Function: Lever

Let everyone know your coming with Sunlite's Gel Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Let everyone know your coming with Sunlite's I Love My Bike Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

- Brass mini bells with a bright clear tone - Designed for use on 22.2mm bars - Small profiled 21mm dome size

•Handlebar mount •Right or left hand use •Fits all bicycles •Alloy ping style bell

- 120db electronic rechargeable bicycle horn with remote - USB 280mAh rechargeable battery charges in 1.2 hours and lasts approximately 30 days or 2500 uses - Charging indicator light shows red when charging, and green when fully charged - IP65 water and dust proof - Compatible with 22.2 - 31.8mm handlebars - Whistle, horn, and alarm sounds

•Classic condor design •Clamp fits most handlebars •Steel construction

• Handlebar mount • Fits most bikes • Ringer style bell • Assorted pictures

- 65mm Bell in the form of a bacon cheese burger - Adjustable handlebar mount - Universal nylon mount - Ringer style mechanism - Function: Lever

- Great novelty horn - Fits most handlebars

•Classic Straight design •Clamp fits most handlebars •10" length