Ski Parts & Accessories

A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

Universal All Temperature. Protects integrated skins from icing and improves glide properties. Recommended maintenance for skin skis to extend their life span and get a better ski experience. To be applied before skiing. Pumpspray. Includes Fiberlene. - 70 ml/2.37 US fl. oz. - 10 pcs.

New fallen snow 0°C to +1°C (32°F to 34°F). Old fine grained snow 0°C to -2°C (32°F to 28°F). For moist new snow up to +1°C (34°F) and down to -2°C (28°F) in older more transformed granular snow. The V-Line of hard kick-waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils.

A trusty scraping tool is a must-have for any skier or snowboarder worth their wax. The 10" Scraper works great on skis, but its true calling is the snowboard life. Twice as wide as most standard scrapers, this one fits comfortably in hand and helps you get the job done in as few passes as possible. It's time to work smarter, not harder. - 10-inch [ 25 cm ] wide for full width scraping - Ideal for snowboard wax removal

Our Adjustable Tuning Iron is a dedicated waxing iron for ski and board care. A thick metal baseplate and tuned thermostat make for easy temp adjustment and even heat for a smooth hot-wax finish. Works with all hot waxes. - Adjustable temperature control - Beveled edges for smooth iron movement - For use with all DAKINE hot waxes

A true purpose-built backcountry multitool, the BC Tool is designed with the needs of the modern backcountry user in mind. An 8 and 10mm wrench plus all the essential bits and sizes—Phillips, Hex, Pozidrive, Flat Head—keep you from getting stranded deep out of bounds, but what really sets this tool apart is the multi-purpose plastic scraper. Now that's something anyone who's spent time on a touring setup can attest to. Oh, and it wouldn't be complete without a way to pop the top on a beverage, hence the bottle opener. - Splitboarding / Ski touring backcountry tool - #1, #2 and #3 Phillips bits - 2mm, 3mm, and 4mm Hex bits - #3 Pozidrive bit - 1/4 Flathead bit - Bottle opener - 8mm and 10mm wrench - Multi-purpose plastic scraper

As close to a hot wax as you can get without an iron. High Octane is our all-temp blended hydrocarbon formula in a push-up container, for easy slopeside application. Rub the wax onto your base, and use the built-in buffer cork on the lid to smooth and polish it. You'll be back out there shredding before you can say "kiss my wax." - Rub-on wax with mini scraper - All Temp blended formula offers near hot wax performance, while on the go - PFC FREE (Perfluorocarbons)

The Mini Edge Tuner Tool combines convenience with practicality, in an even smaller pocket-friendly size than the Edge Tuner, so you can bring it with you basically anywhere you wear pants. The large surface area easily rests against your base, positioning the file at just the right angle for the perfect edge. With two angle settings to choose from—0 degrees for soft or normal snow, and 2 degrees for more hold in hard, icy conditions. Give yourself the gift of a midday tune-up and you'll wonder how you ever survived without it. - Pocket-sized guide for side edge filing - Two-sided tool offers the choice of a 0 or 2-degree bevel - MagnaTraction compatible

Our best-selling multi-tool for over 20 years, the Torque Driver comes with all the standard bits you'll need for your skis, snowboard, or surfboard. The stowaway handle makes it a ridiculously convenient tool to throw in with any tuning kit, or keep in your pocket through an entire day on the mountain for quick, on-the-go tweaks to your rig. - 6 piece ratchet driver - #2 and #3 Philips - #3 Pozidrive - 3/32 hex - 1/4 flat head - 8mm and 10mm wrench

The Triangle Scraper gives you more options in sharpened edges, pointed corners, and angles to hold and apply pressure from. There's a notched corner that's perfect for skimming leftover wax off the edges of your ski or snowboard, and a hole punched in another corner that lets you rig the scraper up to a keyring or lanyard. Sling it over a nail in the garage, your rearview mirror, or around your neck if really want to keep it close at hand. - Tri shape gives more scraping leverage - Six sharpened edges - Notched for edge scraping - Great for skis or snowboards