Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Car Racks

Yakima BackRoad 2
$299.00
Whether you're going on a cross country family road trip or heading out for a bike-friendly weekend, the BackRoad is your take-it-easy answer. With increased bike spacing, the BackRoad makes it easy to pack more bikes with a lot less hassle. Cradles and pads provide a snug and protected fit, while fully removable ZipStrips make loading a breeze. An SKS bike locking system is included to give you some peace of mind on your travels. Product Details - 7" spacing between bikes for easier loading - Soft cradle pads for added bike protection - Side to side cradle rotation for a better bike fit - Anti-sway cradles eliminate bike-to-bike contact - Mast tilts down for easy hatch access - Integrated SKS locking cable locks bikes to rack - ZipStrips secure bikes to the rack and are fully removable - Arms fold down when not in use - 37.5lb weight maximum per bike - Fits 1.25" and 2" hitch receiver - Integrated Yakima bottle opener - Carries up to 2 bikes. Also available in a 4 bike capacity - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Weight: 31.21 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty
Yakima BackRoad 4
$329.00
Whether you're going on a cross country family road trip or heading out for a bike-friendly weekend the BackRoad is your take-it-easy answer. With increased bike spacing, the BackRoad makes it easy to pack more bikes with a lot less hassle. Cradles and pads provide a snug and protected fit, while fully removable ZipStrips make loading a breeze. An SKS bike locking system is included to give you some peace of mind on your travels. Product Details - 7" spacing between bikes for easier loading - Soft cradle pads for added bike protection - Side to side cradle rotation for a better bike fit - Anti-sway cradles eliminate bike-to-bike contact - Mast tilts down for easy hatch access - Integrated SKS locking cable locks bikes to rack - ZipStrips secure bikes to the rack and are fully removable - Arms fold down when not in use - 37.5lb weight maximum per bike - Fits 1.25" and 2" hitch receiver - Integrated Yakima bottle opener - Carries up to 2 bikes. Also available in a 4 bike capacity - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Weight: 31.21 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty
Yakima BaseClip
$68.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima BaseLine Towers
$139.00 - $235.00
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”
Yakima BigStack
Now the entire posse only needs to mount up on one vehicle. The BigStack lets you carry up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. Folds down for better aerodynamics when not in use. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds down when not in use for better aerodynamics and easier access to your garage - Universal built-in hardware fits round, square, factory and aerodynamic crossbars right out of the box. Optimized for aerodynamic bars. - Top-of-the-line hull guard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - AnchorHead tie down feature makes it easy to manage straps with multiple kayaks - Heavy-Duty Straps and Bow and Stern Tie-Downs included (HoodAnchor, sold separately, is required for vehicles with no attachment points for Bow and Stern Tie-Downs) - Premium heavy-duty straps with coated metal buckles protect boat and vehicle - Great for carrying multiple whitewater boats - Lockable with SKS Lock Cores (sold separately) - Minimum crossbar spreads of 24" or more Product Specs: - Weight: 7.20 lbs. - Dimensions: L 6.00 in x W 5.00 in x H 22.00 in - Minimum Crossbar Spread 24.00in - Limited Lifetime Warranty
Yakima Chain Straps
$10.00
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Yakima CoreBar EndCaps
Pair of EndCaps for Yakima CoreBar.
Yakima Corebar
$180.00 - $199.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Yakima CrossBar Pads
$39.00
Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars
Yakima CrossBars
$115.00
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Yakima Crossbar Pads
Anything you can put on the water you can put on a pair of these 20" foam pads. They're designed to protect your gear and crossbars during loading and on the road. - Fits round and square crossbars. - 20" wide foam pads for flexible configuration - Fits Yakima round and square crossbars Works great with BigStack, KayakStacker or Heavy-Duty Straps - Comes with 2 pads per package
Yakima EXO DoubleUp
$499.00
The two-bike EXO DoubleUp attaches directly to the EXO SwingBase, or to the second tier EXO TopShelf, allowing room for an EXO GearLocker or EXO GearWarrior below. Either way, it's super-easy access that accommodates anything you're riding—fat tires to road bikes and everything in between. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - Carries 2 bikes up to 50 lbs. each when mounted on EXO SwingBase - Carries 2 bikes up to 40 lbs. each when mounted on EXO TopShelf - Tool-free, locking SpeedKnobs attach and lock EXO DoubleUp to EXO SwingBase or TopShelf - Use SKS Lock cores included with EXO SwingBase or EXO TopShelf for added bike security - Limited Lifetime Warranty - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 37.15 lbs. - Dimensions: L 26.60 in x W 72.00 in x H 7.00 in - Limited Lifetime Warranty
Yakima EXO GearWarrior
$369.00
When you need to transport coolers, firewood, or bulky gear from your home to your vehicle to your destination, the EXO GearWarrior is where it's at. Simply attach to your EXO SwingBase or EXO TopShelf, load up and get out. Add the available EXO WarriorWheels to turn the EXO GearWarrior into a handy wagon with wheels and a handle that can be attached while the EXO GearWarrior is still on your hitch. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Weather-resistant, heavy-duty steel construction for years of rugged use - Tool-free, locking SpeedKnobs attach and lock EXO GearWarrior to EXO SwingBase or EXO TopShelf - 250lb gear weight limit when mounted on EXO SwingBase w/out EXO TopShelf - 110lb gear weight limit when mounted on EXO SwingBase w/EXO TopShelf installed - 80lb gear weight limit when mounted on EXO TopShelf - Add the optional EXO WarriorWheels cart kit to easily transport gear to campsite, beach bonfire, or soccer game - Limited Lifetime Warranty - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 22.00 lbs. - Dimensions: L 60.00 in x W 23.00 in x H 6.50 in - Limited Lifetime Warranty
Yakima EXO TopShelf
$399.00
Double your hitch capacity with a second tier of super-accessible storage with the EXO TopShelf. Whether you're cycling and camping, skiing and hiking or simply needing to double your load, the EXO TopShelf can mix-and-match EXO accessories to make any adventure easier. - Attaches to EXO SwingBase to create a second level on your EXO Hitch system - Rotates 180 Degrees relative to EXO SwingBase for easy access to gear on lower level or to set-up base camp mode - Accessories install in seconds using the tool-Free EXO Cleat system with locking SpeedKnobs - Included HitchLock locks EXO TopShelf to EXO SwingBase - Includes 2 extra SKS locks cores for use with EXO accessories - Includes a jack stand for base camp mode set-up - Quick and easy install and removal - Limited Lifetime Warranty - Requires EXO SwingBase Product Specs: - Weight: 33.50 lbs. - Dimensions: L 31.00 in x W 25.00 in x H 26.60 in - Limited Lifetime Warranty
Yakima Eye Bolts
Our versatile new Eye Bolts integrate seamlessly with our Truck Collection HD Bars, and most T-slot crossbars, to create instant tie-down points for securing gear. Made Yakima-smart, they’re secure, strong and easy to install—just drop them into the slot and twist into place. Product Details: - Rugged steel construction with durable black corrosion resistant finish for many years of use - Includes hardware for both HD Bar and standard T-slot crossbars - Handles up to 250 lbs. on our HD Bars, and up to 165 lbs. on Yakima JetStream, FlushBar and RailBar crossbars - Set of two Product Specs: - Weight: 0.50 lbs - Dimensions: L 1.75in x W 0.75in x H 2.12in
Yakima Fat Straps
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in
Yakima FatCat EVO 6
$329.00
The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry six pairs of powder skis—up to 136mm at the tip—or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The OverHang clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security, and the mirror black finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries six pair of skis—up to 136 mm wide at the tip—or four snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - For easier access to skis and snowboards, the OverHang clamp-mounting position shifts the mount further out on your vehicle's roof rack - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 12.75 lbs. - Dimensions: L 40.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
Yakima Fork Adapter
$59.00
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty
Yakima ForkLift
$199.00
The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
Yakima FullBack 3
$279.00
A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
Yakima HD Bar
$299.00
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in
Yakima Holdup Wheelstrap
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Yakima JayHook
$169.00
Simple, sturdy, and reliable – the JayHook is a fresh take on a Yakima classic. Designed to carry all types of kayaks, these side-loading J cradles are tough enough for years of use, secure enough for winding river roads, and padded enough to coddle your kayak. The tool-free universal attachment works with most roof racks. Bow/Stern Tie downs and Heavy Duty Straps are included, so you get everything you need to carry your boat. - Carries any type of kayak while taking minimal space on your roof rack - J-shaped cradle is secure, stable, and easy to load - Durable padded contact points provide protection and grip while traveling - Universal mounting hardware fits most roof racks - Easy tool-free installation lets you quickly mount, load and go - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs
Yakima Jaylow
$219.00
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24inches or more
Yakima Jetstream Bar
$229.00
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
Yakima Landing Pad
$48.00 - $136.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima OnRamp 2
$649.00
Say goodbye to awkward loading options, and hello to your e-bike’s new best friend. The OnRamp blends simple, efficient design with secure performance, to create a no-compromise rack to ease the challenge of carrying heavier bikes. An integrated ramp lets you roll your ride right into place, adjustable trays reduces bike to bike interference, and conforming frame clamps means it can carry a wide range of bike styles—from e-bikes to town bikes to mountain bikes and fendered-up road bikes—with ease. With a capacity of up to two 66-pound bikes, you can leave your battery on the bike and hit the road. Product Details - Engineered to carry 2 bikes up to 66-lbs each - Integrated ramp for easy, roll-on loading, and stows away neatly - Adjustable frame attachments means you can carry E-Bikes, mountain, road, hybrid, women’s specific, BMX, kids bikes and bikes with fenders with ease. - Accommodates tires up to 3.25” wide and up to 27.5x 4.5” wide tires with the FatStrap Kit (sold separately) - Accommodates bike wheelbases up to 50” - Integrated SKS (Same Key System) locks included to secure bikes to rack and rack to vehicle receiver - Tilts forward with bikes loaded for trunk access - Adjustable bike trays minimize bike-to-bike interference - Off-Road Rated at 40lbs per bike - RV Rated at 40lbs per bike Product Specs - Weight: 42.60 lbs. - Dimensions: L 34.00 in x W 52.00 in x H 45.00 in - Limited Lifetime Warranty
Yakima RidgeBack 5
$399.00
Here's a hitch rack that goes long on features. Starring the UpperHand control lever that tilts the rack to make access to your vehicle a cinch. Also includes zero-hassle ZipStrips to secure your bike, folds flat for easy storage and to top it off is fully assembled out of the box. - No garage required. Comes fully assembled with no bits and pieces. - New UpperHand lever tilts rack down for vehicle access and folds it flat for storage. - New ZipStrips secure bikes to the rack and are fully removable. - Tool-free SpeedKnob quickly tightens and lock the rack to your car. - Anti-sway cradles eliminate bike-to-bike contact. - Enjoy a cold one with the Yakima signature bottle opener. - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Fits 1.25" and 2" hitch receiver. - Carries up to 5 bikes. Also available in a 2 or 4 bike capacity. - Lock your bikes to the rack with the HandCuff locking cable (sold separately). Product Specs: - Weight: 35.60 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty
Yakima RidgeClip
$136.00
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
Yakima RidgeLine Towers
Take sleek to a new level – the ingenious RidgeLine Towers integrate with flush-mount factory side rails so you can build a real rack that carries more. Strong and versatile, they attach easily and have a sleek design that aligns with your vehicle’s aerodynamic attitude. - Attaches a base rack system to vehicles with flush-mount factory side rails. RidgeClips and crossbars required for a complete system. - Both are sold separately. Use Fit My Vehicle to find the clips and crossbars. - Advanced design is strong and quiet and aligns with aerodynamic vehicle aesthetics - Works with JetStream, CoreBar and RoundBar crossbars - Unique clip design adapts to your rails for a secure, accurate fit - BarBed has 12° of pitch adjustment to optimize tower position and level bars - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Weight: 1.25 lbs - Dimensions: L 5.00” x W 5.25” x H 3.50”
Page 1 of 10 Next page